歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

檢查噴淋清洗機的一些關鍵點

作者：admin來源：http://www.puyingshiye.com.cn/時間：2023-01-13

噴淋清洗機噴嘴無污染或堵塞。如果孔口堵塞，就會阻礙水流和水壓，影響清洗機的性能。清洗機的水在清洗循環過程中被循環利用，其中攜帶的污染物可能停留在噴淋臂內。噴淋臂應定期清洗。

The spray washer nozzle is free of pollution or blockage. If the orifice is blocked, it will block the water flow and water pressure and affect the performance of the cleaning machine. The water of the cleaning machine is recycled during the cleaning cycle, and the pollutants carried in it may stay in the spray arm. The spray arm should be cleaned regularly.

噴淋臂上的出水孔面向目標表面。部分清洗機的噴臂在使用過程中松動和旋轉，導致噴臂不能面向儀器。許多噴臂兩側都有孔;這些孔可以向上或向下調整。

The water outlet on the spray arm faces the target surface. The spray arm of some washing machines is loose and rotated during use, resulting in the spray arm can not face the instrument. Many spray arms have holes on both sides; These holes can be adjusted up or down.

完整噴槍:部分醫院全部噴槍缺失，但機器仍在使用。如果噴淋臂缺失，清洗機無法正常運轉，因為水壓和水噴淋會大大削弱機械清洗效果。如果噴淋臂沒有了，不要使用墊圈。

Complete spray gun: all spray guns are missing in some hospitals, but the machine is still in use. If the spray arm is missing, the cleaning machine cannot operate normally, because water pressure and water spray will greatly weaken the mechanical cleaning effect. If the spray arm is not available, do not use gasket.

噴淋臂旋轉暢通:測試噴淋臂旋轉平穩均勻。

The spray arm rotates smoothly: the spray arm rotates smoothly and evenly.

噴淋清洗機底部的排水屏上無雜物:清洗機底部的排水屏?xí)Ａ魞x表組的污染物。篩網至少每天拆下清洗一次，或根據使用次數增加清洗次數。堵塞的篩網會阻礙水流和排水，從而影響清洗機的清洗效果。

There are no sundries on the drain screen at the bottom of the spray washer: the drain screen at the bottom of the washer will retain the pollutants of the instrument cluster. The screen should be removed and cleaned at least once a day, or the cleaning times should be increased according to the use times. Blocked screen will block water flow and drainage, thus affecting the cleaning effect of the cleaning machine.
噴淋清洗機

儀表機架聯軸器與歧管正確對準。確保洗衣機的水/洗滌劑進口與清洗架歧管正確對齊。如果沒有對準，會影響水流、水的分布和水壓，可能導致墊圈運轉異常。水壓不足會使噴淋臂無法正常工作，削弱機械清洗效果。

The instrument frame coupling is correctly aligned with the manifold. Make sure that the water/detergent inlet of the washing machine is correctly aligned with the washing rack manifold. If it is not aligned, it will affect the water flow, water distribution and water pressure, and may cause abnormal operation of the gasket. Insufficient water pressure will make the spray arm unable to work normally and weaken the mechanical cleaning effect.

噴淋臂襯套完好無損:確保所有襯套、聯軸器、墊圈等完好無損，無裂縫或損壞。

The spray arm bushing is intact: ensure that all bushings, couplings, washers, etc. are intact without cracks or damage.

洗滌劑/化學品輸送管道清晰、功能齊全:目視檢查所有洗滌劑和其他化學品輸送管道及連接端口，確保管道暢通、清潔、無堵塞、堵氣、無扭結。還應檢查管道上的磨損痕跡、損壞或泄漏。如果輸送管道有缺陷，清洗液的濃度可能不正確，從而使清洗周期失效。

The detergent/chemical delivery pipeline is clear and fully functional: visually inspect all detergent and other chemical delivery pipelines and connection ports to ensure that the pipeline is smooth, clean, free from blockage, gas blockage and kink. The pipes should also be checked for signs of wear, damage or leakage. If the conveying pipeline is defective, the concentration of cleaning fluid may be incorrect, which will invalidate the cleaning cycle.

檢查所有化學品和清洗劑的濃度是否正確:確保清洗劑和其他化學品容器內的余量充足，并確保輸配管道正確連接到相應的容器上。

Check whether the concentration of all chemicals and cleaning agents is correct: ensure that the amount of cleaning agents and other chemicals in the container is sufficient, and ensure that the transmission and distribution pipeline is correctly connected to the corresponding container.

此外還需要檢查清洗機有窗戶和內部照明燈具，可以在循環過程中觀察清洗機的性能。在循環過程中，觀察噴淋臂是否正常工作，沒有儀器/托盤妨礙清洗器的工作。觀察流動情況，確保沒有多余的泡沫。更多相關內容就來我們網站www.puyingshiye.com.cn咨詢吧！

In addition, it is also necessary to check that the washer has windows and internal lighting fixtures, so that the performance of the washer can be observed during the cycle. During the cycle, observe whether the spray arm works normally, and no instrument/tray hinders the operation of the washer. Observe the flow to ensure that there is no excess foam. For more information, please visit our website www.puyingshiye.com.cn!

上一篇：超聲波清洗機清洗技術的“用武之地”在哪里？
下一篇：多槽手動超聲波清洗機的幾種部件維修方法